- 3 In 1 NC Feeder
- Air Feeder
- Generic Stamping Press
- Mini Press
- NC Servo Roll Feeder
- Power Press
- Servo Press
- Spare Part
- Steel Coil Uncoiler
- Used Power Press
Ai Automation Machinery
Sdn Bhd
12, Lorong Seri Gambut 2,
Off Jalan Kebun,
41100 Klang,
Selangor, Malaysia.
Manual Steel Coil Uncoiler
| Previous | 2 / 2 | Next |
Manual Steel Coil Uncoiler
Model:MT-200
Quick Details
|
Condition: New Type: Uncoiler Use: Sheet Place of Origin: Guangdong, China Brand Name: Jieda Voltage: 380V/Customize Power(W): .0kw Dimension(L*W*H): 860*900*1060mm Weight: 320kg Certification: CE and ISO Warranty: 1 Year After-sales Service Provided: Field installation, commissioning and training
|
Material width: 50-200mm Material thickness: 0-3.0mm Color: Customize Coil.I.D: 450-530mm Coil.O.D: 1200mm Coil weight: 500kg Max speed: 0-16m/min Motor: Manual Material: Coil material Market: Global Supply Ability: 1 Set/Sets per Month Packaging: wooden box Port: Shenzhen/guangzhou port |
Product Application:
The heavy uncoiler machine consist of the fuselage, the main shaft, the support tile, the induction control lever, the a type iron and the electric control box.
1. The bottom of the fuselage is provided with a bottom plate, and a support frame is fixed at the bottom of plate, and the support frame is provided with two sets of national standard H shaped steel
2. There is an electric control box installed on the side of the fuselage, and a motor is installed inside. the electric control box is convenient for control the device, and a rubber cushion is arranged under the motor
3. The output end of the motor is equipped with a reducer, and the output end of the reducer is mounted with a spindle extending to the outside of the fuselage
4. The spindle is mounted on the end of the main body near the fuselage, and end of the main shaft away from the back wheel is mounted with a crank handle through the main shaft sleeve. the heavy uncoiler machine back wheel avoids material deviation, and the hand crank is installed away from the end of the main shaft. with non-slip handles
5. The four sides of the main shaft are evenly mounted with four sets of support links. the support link is equipped with a heavy material support tile. The support link can adjust the diameter of the material. The outer surface of the heavy material support tile is coated with a wear resistant, non slip coating, heavy duty material tray that can carry heavy coil material
6. The outer side wall of the bottom of the fuselage is equipped with an induction lever through the edge plate.
| MT Coil Uncoiler Machine Specification | ||||
| Model | MT-200 | MT-300 | MT-400 | MT-500 |
| Material width(mm) | 200 | 300 | 400 | 500 |
| Material thickness(mm) | 0-3.0 | 0-3.0 | 0-3.0 | 0-3.0 |
| Power | AC380v | |||
| Coil.I.D(mm) | 450-530 | 450-530 | 450-530 | 450-530 |
| Coil.O.D(mm) | 1200 | 1200 | 1200 | 1200 |
| Machine weight(kg) | 320 | 370 | 420 | 450 |
Installation step:
- First use forklift move the heavy duty uncoiler machine to the approximate position to be installed, and then remove the attached packing mat (wooden box)
- It's easy to install the heavy duty uncoiler machine, as long as the heavy duty uncoiler machine is placed on the foundation and the underground bolts are locked (as shown in the figure), or you can use a manual forklift to move.
- When installing heavy duty uncoiler machine, it is important to note that the centerline of the heavy duty uncoiler machine ( the center of the length of the loaded coil) must be on the same centerline as the straightener or feeder machine (or shearing machine).
- After installing the heavy duty uncoiler machine, please cleaning the anti rust oil from the machine and re-lubricate the oil.